Wax Applicator Hoses

#HT621000      $283.00

Features Hand held dispenser, like writing with a large pen Adjustable flow of seam wax to the pattern Continuous flow of wax with the press of a lever Interchangeable tips for bead size control Fully repairable at our in house location

Wax Applicator Hose (Voltage Regulated) This hose is the replacement for the CV211505 Applicator unit.  There is a blue sticker on the face of the control unit and a blue band on the hose located close the DIN plug. Lever actuated flow Hose length 62" Flow control adjusting screw in handle Accepts interchangeable tips Very flexible feed hose

Specifics Length of hose varies between models. Handle 5/8" diameter Adjustable flow via flow control screw. Fixed heat set @ nominal 185 F Quick disconnect from control unit.

Wax Applicator Hose (Old Standard) This hose is the replacement for the Old Standard Units sold pre-fall 2001 part number CS211505.  Not sure if your tank is the model? Look on the bottom of the unit on the rear left corner. If there is a cooling fan then you have CV211505 see above.  If there is no fan then you need this replacement hose. Lever actuated flow Hose length 72" Flow control adjusting screw in handle Accepts interchangeable tips Very flexible feed hose

#HL741000      $283.00

Wax Applicator Hose (Solenoid) This hose used with applicator model CR211505 Lever actuated flow Hose length 72" Flow control adjusting screw in handle Accepts interchangeable tips Very flexible feed hose

#HS741000      $352.50